printer sharing

Carlos,

The printer is shared on Windows XP desktop. Vista is installed on a laptop.
Since I use wireless connection on a laptop and move around, I need to be
able to use a printer connected to XP desktop.

"Carlos" wrote:

> Monika:
> I am not in a Vista machine right now.
> Go to Networking Center and enable printer sharing and disable the password
> requirement.
> It is very easy to figure out what to enable or not there.
> That should fix it.
> Carlos
>
> "Monika" wrote:
>
> > I have home network with 3 XP computers, using XP wizard I setup workgroup,
> > shared folders and shared printers. If I add new XP workstation, printers
> > are immediately added.
> > Lately I installed Vista RC1 on the notebook, after initial fight with
> > wireless connection, I was finally able to setup Vista, enabled Public folder
> > sharing.
> > I can access folders and files on XP desktop, but when trying to access the
> > printer, I get access denied. Using the same logon information on both XP
> > and Vista.
> >
> > Any suggestions?
 >> Stay informed about: printer sharing 

I had the same problem as you.. RC2 seemed to fix it..


"Monika" wrote in message

>I have home network with 3 XP computers, using XP wizard I setup workgroup,
> shared folders and shared printers. If I add new XP workstation, printers
> are immediately added.
> Lately I installed Vista RC1 on the notebook, after initial fight with
> wireless connection, I was finally able to setup Vista, enabled Public
> folder
> sharing.
> I can access folders and files on XP desktop, but when trying to access
> the
> printer, I get access denied. Using the same logon information on both XP
> and Vista.
>
> Any suggestions?
 >> Stay informed about: printer sharing 

Mike,
Runnin RTM- same issue
I have no clue.
Unless Vista won't allow printer sharing to XP Home.
I get access denied in RTM- I give up.

Jeff

"Mike Hall - MS MVP Windows Shell/User" wrote in message

>I had the same problem as you.. RC2 seemed to fix it..
>
>
> "Monika" wrote in message
>
>>I have home network with 3 XP computers, using XP wizard I setup
>>workgroup,
>> shared folders and shared printers. If I add new XP workstation,
>> printers
>> are immediately added.
>> Lately I installed Vista RC1 on the notebook, after initial fight with
>> wireless connection, I was finally able to setup Vista, enabled Public
>> folder
>> sharing.
>> I can access folders and files on XP desktop, but when trying to access
>> the
>> printer, I get access denied. Using the same logon information on both
>> XP
>> and Vista.
>>
>> Any suggestions?
>
 >> Stay informed about: printer sharing 

Hello.

I ran into this problem using OneCare Beta. I could not get any network
connectivity, uninstalled one Care and put the trend pc-cillin beta on and
things worked fine.

also, if you are unaware you need to set up permissions for your network
computers in Vista, like xp. I am not sure if the wizard works since I did it
manually.

Good Luck

Jones
--
"There's Things I am and Things I'm Not"


"Monika" wrote:

> I have home network with 3 XP computers, using XP wizard I setup workgroup,
> shared folders and shared printers. If I add new XP workstation, printers
> are immediately added.
> Lately I installed Vista RC1 on the notebook, after initial fight with
> wireless connection, I was finally able to setup Vista, enabled Public folder
> sharing.
> I can access folders and files on XP desktop, but when trying to access the
> printer, I get access denied. Using the same logon information on both XP
> and Vista.
>
> Any suggestions?
 >> Stay informed about: printer sharing 

Problem: An XP PC on the network has a printer attached that other computers
running XP or linux are able to access. However, Vista PCs that attempt to
connect to this printer get an 'access denied' error, even though file
sharing otherwise works.

If file sharing is otherwise working, and Vista has native printer drivers
for the printer on the network XP PC with the printer you wish to access,
CAREFULLY follow these steps:

Add the printer driver on the Vista PC, using control panel/printers/add
printer/local printer (important: local, not network printer). Choose the
printer driver from Vista's table of selectable printer drivers. Choose LPT1
as the local port even though this will ultimately be a networked printer.

After the driver is installed, what you do next is select (right click) the
newly installed printer, choose properties, ports, add port. Then manually
add a new Local Port with:

\\computer_name\shared_printer_name

as the port name. In my case, the port name for the printer on my XP Home PC
is \\danscomputer\hpdeskje

Make sure you select this newly created port as the active port for the
printer.

Print some pages to test and you are done!
 >> Stay informed about: printer sharing 

"no@email.com" wrote:

> Problem: An XP PC on the network has a printer attached that other computers
> running XP or linux are able to access. However, Vista PCs that attempt to
> connect to this printer get an 'access denied' error, even though file
> sharing otherwise works.
>
> If file sharing is otherwise working, and Vista has native printer drivers
> for the printer on the network XP PC with the printer you wish to access,
> CAREFULLY follow these steps:
>
> Add the printer driver on the Vista PC, using control panel/printers/add
> printer/local printer (important: local, not network printer). Choose the
> printer driver from Vista's table of selectable printer drivers. Choose LPT1
> as the local port even though this will ultimately be a networked printer.
>
> After the driver is installed, what you do next is select (right click) the
> newly installed printer, choose properties, ports, add port. Then manually
> add a new Local Port with:
>
> \\computer_name\shared_printer_name
>
> as the port name. In my case, the port name for the printer on my XP Home PC
> is \\danscomputer\hpdeskje
>
> Make sure you select this newly created port as the active port for the
> printer.
>
> Print some pages to test and you are done!
>

Same problem as others with desktop XP and Vista laptop. Tried to add new
port on Vista laptop and it would not take it.
 >> Stay informed about: printer sharing 

I had the same problem: 'access denied' from a wireless vista laptop to an XP
usb'd printer. I followed the directions below and instantly had access!!

Thanks

"no@email.com" wrote:

> Problem: An XP PC on the network has a printer attached that other computers
> running XP or linux are able to access. However, Vista PCs that attempt to
> connect to this printer get an 'access denied' error, even though file
> sharing otherwise works.
>
> If file sharing is otherwise working, and Vista has native printer drivers
> for the printer on the network XP PC with the printer you wish to access,
> CAREFULLY follow these steps:
>
> Add the printer driver on the Vista PC, using control panel/printers/add
> printer/local printer (important: local, not network printer). Choose the
> printer driver from Vista's table of selectable printer drivers. Choose LPT1
> as the local port even though this will ultimately be a networked printer.
>
> After the driver is installed, what you do next is select (right click) the
> newly installed printer, choose properties, ports, add port. Then manually
> add a new Local Port with:
>
> \\computer_name\shared_printer_name
>
> as the port name. In my case, the port name for the printer on my XP Home PC
> is \\danscomputer\hpdeskje
>
> Make sure you select this newly created port as the active port for the
> printer.
>
> Print some pages to test and you are done!
>
 >> Stay informed about: printer sharing 

I see lots of comments about xp and vista fixes but nothing about XP to
Windows 7.
I have the same problem, running 2 desktops with XP printer hard wired to
desktop. Laptop running win7 sees other machines but won't connect to the
printer, win7 has homegroups rather than workgroups.. but it only works if
all machines are running win7. any ideas? thanks

"no@email.com" wrote:

> Problem: An XP PC on the network has a printer attached that other computers
> running XP or linux are able to access. However, Vista PCs that attempt to
> connect to this printer get an 'access denied' error, even though file
> sharing otherwise works.
>
> If file sharing is otherwise working, and Vista has native printer drivers
> for the printer on the network XP PC with the printer you wish to access,
> CAREFULLY follow these steps:
>
> Add the printer driver on the Vista PC, using control panel/printers/add
> printer/local printer (important: local, not network printer). Choose the
> printer driver from Vista's table of selectable printer drivers. Choose LPT1
> as the local port even though this will ultimately be a networked printer.
>
> After the driver is installed, what you do next is select (right click) the
> newly installed printer, choose properties, ports, add port. Then manually
> add a new Local Port with:
>
> \\computer_name\shared_printer_name
>
> as the port name. In my case, the port name for the printer on my XP Home PC
> is \\danscomputer\hpdeskje
>
> Make sure you select this newly created port as the active port for the
> printer.
>
> Print some pages to test and you are done!
>
 >> Stay informed about: printer sharing