MS Publisher Print Layout Issue

Hi there,

I am running Vista Home Premium, Publisher 2007, Epson Stylus Photo R800
printer.
i want to print 10 business cards on some precut business card paper. i
designed my card, then when i go to set the print margins, this is where i
have the issue. i set the top margin .5", side margin .75, Horz gap .0", Vert
gap .0", just like the precut sheet. i should see 10 business cards, but only
the top 6 cards show, with room for the 4 other cards, but that area is
blank. i have tried this on laser jet printer as well, with the same results.
i am familiar with publisher and formatting the printer, so i am quite
baffled. i have dug around and looked at every setting i could find, with no
luck. i used the snipping tool to capture an image of the issue, is there a
way to upload that pic?
--
Thanx for any help
Ray

=?Utf-8?B?cmF5?=;145620 Wrote:
> Hi there,
>
> I am running Vista Home Premium, Publisher 2007, Epson Stylus Photo
> R800
> printer.
> i want to print 10 business cards on some precut business card paper.
> i
> designed my card, then when i go to set the print margins, this is
> where i
> have the issue. i set the top margin .5", side margin .75, Horz gap
> .0", Vert
> gap .0", just like the precut sheet. i should see 10 business cards,
> but only
> the top 6 cards show, with room for the 4 other cards, but that area
> is
> blank. i have tried this on laser jet printer as well, with the same
> results.
> i am familiar with publisher and formatting the printer, so i am quite
> baffled. i have dug around and looked at every setting i could find,
> with no
> luck. i used the snipping tool to capture an image of the issue, is
> there a
> way to upload that pic?
> --
> Thanx for any help
> Ray

Hi..!
I think you no need to effort much because, as their is much demand for
business cards you can make a print of your business card according to
your requirements.
Good luck...!


--
Thomas55

'business cards' (http://www.rfkprintsolutions.co.uk) | 'flyers'
(http://www.rfkprintsolutions.co.uk)
Posted via http://www.vistaheads.com