Freezing on Disk.sys or crcdisk.sys? I've got a possible s..

Warning...long winded skip to end for solution withot the history
Got my DVD's from MS.

Booting from DVD resulted in a freeze right after loading files (the very
first one)
Ran Setup from within XP, it would copy files and on the first reboot it
would freeze in the same place.
Tried starting in safe mode, and it would lock up when loading disk.sys

After a long while of messing with it, I noticed that the date was munged in
my bios. So I set the date to current time, and my PC no longer locked at
disk.sys
and I was able to finish the install.

Upon reboot however I now had a lockup on crcdisk.sys. My first thought was
that I hosed a setting in bios, so I opened my case to jumper clear CMOS. Got
it all set back to factory defaults (with the correct date...this may not
have really affected the disk.sys lockup) closed my case and tried to
install....and it froze on crcdisk.sys again....

So back into bios I went to disable hardware and try different clock
speeds, picked one that prevented my computer from booting, so I once again
opened my case cleared cmos and decided to leave the case open...because it
was bound to happen again. Factory defaults again an vista installed without
a hiccup. So I rebooted and I was able to bring the system up in safe mode to
try and resolve a video card conflict (still working on that one and am
posting this in safe mode right now)

I figured I was done with the inside of my case so I closed it back up,
tried to change my vid drivers...rebooted...and froze on crcdisk.sys
again....so I opened my case and rebooted and it worked in safe mode again....

I have a fan on the door of my case, everytime I open the case I have to
unplug the fan. Unplugged, vista works, plugged in....I'm maxing my power
supply and Vista cannot run properly. I have not yet done testing to see if
it was an unbalanced rail issue or if I just had too much draw period. I was
just happy to get it running and after I figure out my video card problem, I
will revist the power issue

SOLUTION: For those of you who do not like a long read
Try Unplugging the power from all non-essential items...primarily case
fans...yes I know, they are essential....but they also put a heavy load on
the el-cheapo sparkle power power supplies that so many vendors put in their
PC's...My test box has a FSP 450watt....But I also run 11 fans....so it's a
lot of juice.

-Ben

If you get your video conflict worked out please post back as I feel this is
causing my slooooooooow boot into Vista

"Colin Barnhorst" wrote:

> Reducing power requirements makes sense to me.
>
> "Ben Salisbury" wrote in message
>
> > Warning...long winded skip to end for solution withot the history
> > Got my DVD's from MS.
> >
> > Booting from DVD resulted in a freeze right after loading files (the very
> > first one)
> > Ran Setup from within XP, it would copy files and on the first reboot it
> > would freeze in the same place.
> > Tried starting in safe mode, and it would lock up when loading disk.sys
> >
> > After a long while of messing with it, I noticed that the date was munged
> > in
> > my bios. So I set the date to current time, and my PC no longer locked at
> > disk.sys
> > and I was able to finish the install.
> >
> > Upon reboot however I now had a lockup on crcdisk.sys. My first thought
> > was
> > that I hosed a setting in bios, so I opened my case to jumper clear CMOS.
> > Got
> > it all set back to factory defaults (with the correct date...this may not
> > have really affected the disk.sys lockup) closed my case and tried to
> > install....and it froze on crcdisk.sys again....
> >
> > So back into bios I went to disable hardware and try different clock
> > speeds, picked one that prevented my computer from booting, so I once
> > again
> > opened my case cleared cmos and decided to leave the case open...because
> > it
> > was bound to happen again. Factory defaults again an vista installed
> > without
> > a hiccup. So I rebooted and I was able to bring the system up in safe mode
> > to
> > try and resolve a video card conflict (still working on that one and am
> > posting this in safe mode right now)
> >
> > I figured I was done with the inside of my case so I closed it back up,
> > tried to change my vid drivers...rebooted...and froze on crcdisk.sys
> > again....so I opened my case and rebooted and it worked in safe mode
> > again....
> >
> > I have a fan on the door of my case, everytime I open the case I have to
> > unplug the fan. Unplugged, vista works, plugged in....I'm maxing my power
> > supply and Vista cannot run properly. I have not yet done testing to see
> > if
> > it was an unbalanced rail issue or if I just had too much draw period. I
> > was
> > just happy to get it running and after I figure out my video card problem,
> > I
> > will revist the power issue
> >
> > SOLUTION: For those of you who do not like a long read
> > Try Unplugging the power from all non-essential items...primarily case
> > fans...yes I know, they are essential....but they also put a heavy load on
> > the el-cheapo sparkle power power supplies that so many vendors put in
> > their
> > PC's...My test box has a FSP 450watt....But I also run 11 fans....so it's
> > a
> > lot of juice.
> >
> > -Ben
>
>
>